Compare Products

Quote list

Careers

+44 (0) 203 3972367

Mon - Fri 8:00 Am - 4:00 Pm

Saturday 8:00 Am - 1:00 Pm

Unit 9, Holdom Avenue, Saxon Park, Milton Keynes, MK1 1QU

TREND Trend Lock Jig | LOCK/JIG

Name: TREND Trend Lock Jig | LOCK/JIG
SKU: LOCK/JIG
Price: 122.99 GBP
Availability: OutOfStock

OverviewSpecificationReviewGallery

Comes with

Lock Jig For Router

Description

Contractor jig with interchangeable templates for use with a plunge router to cut the mortise & face-plate recess for popular door locks.

For most common sash mortises & dead locks, with up to 3 inch deep mortises & a 7/8 inch or 1 inch face-plate.

Deeper mortises can be achieved with a suitable size of auger bit.

Fast, clean & accurate results on doors 34mm to 58mm thick, even in hardwood.

Steel plates & body.

An auger bit and drill is required to complete deep mortises.

The jig requires a 1/2- inch plunge router with a 80mm plunge, fitted with a 30mm guide bush with 6mm spigot & 12mm diameter long reach cutter. A 1/4-inch plunge router can be used for the face plate but will not achieve full depth of mortise.

Specifications:

Door thickness min.=34 mm

Door thickness max.=58 mm

Template outer size=234.3 x 59.8 x1.5mm

Lock faceplate sizes

Metric D x OL (Imperial D x OL approx.).=Template

22.2x156 mm (7/8"x 6 1/8")=1

22.5x152.5 mm (7/8"x 6")=2

25.4x121 mm (1"x 4 3/4")=3

25.4x127.5 mm (1"x 5")=4

25.4x133.5 mm (1"x 5 1/4")=5

25.4x145 mm (1"x 5 3/4")=6

25.4x153 mm (1"x 6")=7

25.4x156.5 mm (1"x 6")=8

25.4x165.5 mm (1"x 6 1/2")=9

25.4x177 mm (1"x 7")=10

25x57.5 mm (1"x 2 1/4")=11 UPPER

26x56.5 mm (1"x 2 1/4")=11 LOWER

25.6x162mm (1"x 6 3/8")=12

Lock mortise sizes

Metric D x OL (Imperial D x OL)=Template

16x72 mm* (5/8" x 2 7/8")=A

16x107 mm* (5/8" x 4 1/4")=B

19x78 mm* (3/4" x 3 1/8")=C

19x109 mm* (3/4" x 4 1/4")=D

24 mm x 24 mm (2 x circle)

*These are maximum mortise lock case (body) lengths, unless radius ends are squared with a chisel. Actual length of mortise is 7mm longer.

Show

Features

For most common sash mortises & dead locks, with up to 3 inch deep mortises & a 7/8 inch or 1 inch face-plate.
Deeper mortises can be achieved with a suitable size of auger bit.
Fast, clean & accurate results on doors 34mm to 58mm thick, even in hardwood.
Steel plates & body.
An auger bit and drill is required to complete deep mortises.

Show

About brand

Trend is a well established company that has been designing and developing router technologies and time saving solutions for tradespeople since 1955. During this time, they have built a recognised brand with a strong and well respected reputation for high quality and innovation. The Trend brand is built/designed to appeal across a range of professions and trades and also within the Craft or DIY market, with products focusing across these key areas.

Share this product